7W Triac Dimmable Led Driver
ELG-07C-42D triac dimmer led driver is an electronic device designed to control the intensity of light emitted by a lamp or lighting fixture. It achieves this by regulating the amount of power delivered to the light source. The triac led dimmer driver in its name refers to the type of semiconductor used, which allows the device to switch high voltage AC power.
- Power Level: 7W
- AC Input Range:100~135V
- Surge Protection: LN-PE: 6KV, L-N 4KV
- IP Rating: IP67
- Dimming: 0-10v/ PWM/Resistor/Timing
Send Inquiry
Product Description
7W Triac dimmable Led driver
ELG-07C-42D triac dimmer led driver is an electronic device designed to control the intensity of light emitted by a lamp or lighting fixture. It achieves this by regulating the amount of power delivered to the light source. The triac led dimmer driver in its name refers to the type of semiconductor used, which allows the device to switch high voltage AC power. This dimmer led driver is capable of handling up to seven watts triac dimmer led driver of power, making it suitable for a variety of lighting applications, from small desk lamps to larger fixtures. It operates by chopping the AC waveform, effectively controlling the 'on' time of the current flow through the light, which in turn adjusts the brightness. The seven-watt triac dimmer driver rating indicates the maximum power that the dimmer can safely manage without overheating or damaging the component. Such drivers are often used in smart home systems for energy efficiency and to create ambient lighting effects.
Product Introduction of 7W Triac dimmable Led driver
The ELG-07C-42D is a 7W Triac dimmable LED driver from FUSO, is a compact and efficient solution designed to power dimmable LED systems. This dimmable led driver is globally recognized, holding a plethora of certifications including CE, RoHS, TUV, UL, ETL, GS, CCC, SAA, PSE, FCC, and CCC, which underscores its adherence to international safety and environmental standards . The ELG-07C-42D dimmable led driver is known for its smooth dimming curve, ensuring a seamless transition between brightness levels without flickering or disruptions .
FUSO specializes in customizing a variety of LED drivers to meet specific customer demands. They offer Dimmable LED Drivers, Triac Dimmable LED Drivers, Contact Current LED Drivers, and Constant Voltage LED Drivers, among others. This customization service exemplifies FUSO's commitment to flexibility and client satisfaction .
The ELG-07C-42D is designed for a broad spectrum of applications, encompassing LED indoor lighting, LED downlights, LED ceiling lights, LED line lights, LED table lamps, and LED light strips. Its versatility makes it a popular choice for creating adjustable and energy-efficient lighting solutions across different settings .
Product Parameter (Specification) of 7W Triac dimmable Led driver
| MODEL | TLG-07V-30D | TLG-07V-36D | TLG-07V-42D | TLG-07V-48D | TLG-07V-54D | |||||||||||||||||||||||||||||||||
| INPUT | Voltage Range | 100-135VAC/200-240VAC | ||||||||||||||||||||||||||||||||||||
| Frequency Range | 47-63Hz | |||||||||||||||||||||||||||||||||||||
| Power Factor | PF>0.95/100VAC, PF>0.95/220VAC | |||||||||||||||||||||||||||||||||||||
| Efficiency | 85.00% | |||||||||||||||||||||||||||||||||||||
| AC Current | 0.06A/ 115VAC / 0.03A/230VAC | |||||||||||||||||||||||||||||||||||||
| Inrush Current | 25Amax.@Full Load,230VAC,Cold Start | |||||||||||||||||||||||||||||||||||||
| Circuit Breaker | 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC | |||||||||||||||||||||||||||||||||||||
| Leakagel Current | <1mA / 277VAC | |||||||||||||||||||||||||||||||||||||
| OUTPUT | DC voltage | 30VDC | 36VDC | 42VDC | 48VDC | 54VDC | ||||||||||||||||||||||||||||||||
| Output rated current | 24-30VA | 30-36VA | 36-42VA | 40-48A | 48-54A | |||||||||||||||||||||||||||||||||
| Rated power | 7W | 7W | 7W | 7W | 7W | |||||||||||||||||||||||||||||||||
| Ripple & Noise | 120mVp-p | 150mVp-p | 200mVp-p | 300mVp-p | 300mVp-p | |||||||||||||||||||||||||||||||||
| Voltage adjustment range | 24-30V | 30-36V | 36-42V | 40-48 | 48-54 | |||||||||||||||||||||||||||||||||
| Voltage accuracy | 士 2.0% | 士 1.0% | 士 1.0% | 士 1.0% | 士 1.0% | |||||||||||||||||||||||||||||||||
| Linear adjustment rate | 士 1.0% | 士 1.0% | 士 1.0% | 士 1.0% | 士 1.0% | |||||||||||||||||||||||||||||||||
| Load regulation ratio | 士 1.5% | 士 1.5% | 士 1.5% | 士 1.5% | 士 1.5% | |||||||||||||||||||||||||||||||||
| Start, rise time | 800ms,80ms/115VAC，500ms,50ms/230VAC@full load | |||||||||||||||||||||||||||||||||||||
| Hold time (typ.) | 30ms/115VAC，230VAC | |||||||||||||||||||||||||||||||||||||
| PROTECTION | Over Current | 95-110%, constant current limit, automatic recovery after abnormal load conditions are removed | ||||||||||||||||||||||||||||||||||||
| Over Voltage Protection | 24-30V | 30-36V | 36-42V | 40-48 | 48-54 | |||||||||||||||||||||||||||||||||
| Turn off output voltage, restart recovery | ||||||||||||||||||||||||||||||||||||||
| Short circuit Protection | Hiccup mode, which can be automatically restored after the abnormal load condition is removed | |||||||||||||||||||||||||||||||||||||
| Over Temperature | Turn off output voltage, restart recovery | |||||||||||||||||||||||||||||||||||||
|
ENVIRO NMENT |
Working Temp | Tcase=-40℃…+70℃ | ||||||||||||||||||||||||||||||||||||
| Max. Case Temp | Tcase= +90℃ | |||||||||||||||||||||||||||||||||||||
| Working Humidity | 20-95% RH,No condensation | |||||||||||||||||||||||||||||||||||||
| Storage Temp | -40...+80℃, 10...95% RH,No condensation | |||||||||||||||||||||||||||||||||||||
| Vibration | 10-500Hz,2G10min./1cycle,60min.eachalongX,Y,Zaxes | |||||||||||||||||||||||||||||||||||||
|
SAFETY & EMC |
Safety Standards |
Conform UL8750(type”TL”)，CSA C22.2 No. 250.0-08，BS EN/EN/AS/NZS 61347-1， BS EN/EN/AS/NZS 61347-2-13，independent，GB19510.1，GB19510.14， EAC TPTC 004，KC61347-1，IP20 |
||||||||||||||||||||||||||||||||||||
| Withstand Voltage | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | |||||||||||||||||||||||||||||||||||||
| Insulation impedance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |||||||||||||||||||||||||||||||||||||
|
Electromagnetic Compatibility |
Conform BS EN/EN55015, BS EN/EN61000-3-2 Class C (@Load>60%) ; BS EN/EN61000-3-3,GB/T 17743, GB17625.1, EAC TPTC 020 |
|||||||||||||||||||||||||||||||||||||
|
Electromagnetic compatibility immunity |
Conform BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547,Light industry standards (Surge immunity: wire-to-ground4KV,Line-to-line:2KV), EAC TPTC 020 |
|||||||||||||||||||||||||||||||||||||
| OTHERS | MTBF | >3000K hrs. MIL-HDBK-217F (25℃) | ||||||||||||||||||||||||||||||||||||
| Dimension | (L) 88mm*(W) 38 mm*(H) 21mm | |||||||||||||||||||||||||||||||||||||
| NOTE |
1: Please refer to "LED Module Driving Method". 2: Ripple and noise measurement method: Use a 12 "twisted pair, and the terminals must be connected in parallel with 0.1 uf and 47uf capacitors, and measure at 20MHZ bandwidth. 3: Type D only adjustable (through internal potential adjustment). 4: Accuracy: including setting error, linear adjustment rate, and load adjustment rate. 5: Unless otherwise specified, all specifications are measured at 230VAC input, rated load, and 25 °C ambient temperature. 6: The power supply is regarded as a component used in combination with the terminal equipment. Because the EMC is affected by the entire device, the terminal equipment manufacturer needs to re-confirm the EMC of the entire device. |
|||||||||||||||||||||||||||||||||||||
Product Details of 7W Triac dimmable Led driver
Product Applications of 7W Triac dimmable Led driver
Product Packaging and Shipping
7W Triac dimmable Led driver has a strong packaging design,it will not be worn or broken during transportation, which can ensure the product reach your hand safely.
Installation Precautions:
1. Please follow the correct input voltage range for installation;
2. Make sure AC input line, DC output line, DIM signal line connect correctly.
FAQ
1.Are you a factory or trading company?
We are a factory, we provide ODM& OEM services.
2.What is your main product line is made?
We mainly produceconstant current led driver ,constant voltage led driver, and dimmable led driver
3. You have the ability to do independent research and development?
The core members of our engineering department have 12-18 years in the LED field, who can give more professional and reliable advice and solution and we have the R&D ability to make our products competitive. We also collect regularly customer feedback, products improvement and new product requirement. We also hold monthly new product launches.
4. What certificates you have?
UL, ENEC, TUV, CE, RoHS, CB, SAA, KC, PSE, BIS and CCC certifications etc.
5.What is your production capacity?
5,0000-10,000pcs per month
6.What is the warranty?
Most of our products are 5 years warranty.
7.How about the delivery time ?
Delivery time for sample:3-5days after get your samples request and samples charge.
Delivery time for mass production: 10-18days after order confirmed after receiving buyer's deposit
8.How do you handle defects?
1/1 replacement of defects within the warranty period.
9.How about the Package & Product design?
Based on factory original box,original design on product with neutral laser and label,original package for export carton.If need your mark on products or packing, please tell us, we can do it for you.
Hot Tags: 7W Triac Dimmable Led Driver, China, Manufacturer, Supplier, Factory, Cheap, Price
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
