Product Description

20W Customized LED driver of corn lamp

The VCG-20C-42A customized led Corn Light, a high-performance lighting solution designed for various commercial and industrial applications. Here are the key features of this custom led corn light:

Input Voltage100-305V, ensuring compatibility with a wide range of power sources.

Output Voltage 36-54V, providing the necessary voltage for LED operation.

Greater than 0.95, which is crucial for energy efficiency and reducing power loss.

Circular bare board design, which is not only aesthetically pleasing but also practical for direct mounting and integration.

The VCG-20C-42A customized led driver is designed to operate without flicker, ensuring a comfortable and stable light output.

Equipped with overvoltage protection to safeguard the LED corn light from power surges and voltage spikes.

The VCG-20C-42A customized led features a constant current drive, which is essential for maintaining consistent brightness and extending the lifespan of the LED.

This LED corn light is an excellent choice for applications where reliability, efficiency, and high-quality lighting are paramount. Whether it's for outdoor post tops, commercial recessed cans, or industrial facilities, the VCG-20C-42A customized led delivers on performance and durability.

Product Introduction of 20W Customized LED driver of corn lamp

The VCG-20C-42A is a custom-designed, high-quality LED corn light driver that is tailored to meet the specific needs of our clients. Bare board drive is engineered to be used within LED corn lamps, offering a versatile and reliable solution for lighting applications. Here's an overview of its standout features:

The VCG-20C-42A is compliant with a range of international safety and environmental standards, including CE, RoHS, TUV, UL, ETL, GS, CCC, SAA, PSE, FCC, and CCC. These certifications ensure that the product meets the highest quality and safety requirements globally.

With a full-voltage input range, the VCG-20C-42A is designed to accommodate various power supply conditions, making it suitable for use in different regions and applications.

The driver boasts a high power factor, which translates to greater energy efficiency and reduced power loss, making it an eco-friendly choice for lighting solutions.

Ensuring a stable and comfortable lighting experience, the VCG-20C-42A is designed to operate without flicker, which is particularly important for applications where visual comfort is a priority.

High PF 24V 80w Constant Voltage Led driver

We stand by the quality and performance of our product, offering a 5-year warranty that reflects our commitment to durability and reliability.

FUSO Company, known for its quality management system ISO9001:2005, has a rich history of 18 years in production and design. With a global reach, FUSO exports to over 50 countries, specializing in the production of various high-power IP65 and IP67 waterproof LED drivers. Our core business is to customized LED drivers according to customer requirements, including Dimmable Led Driver, Triac Dimmable Led Driver, Contact Current LED driver, and Constant Voltage LED driver, among others.

The VCG-20C-42A, along with our other products, finds applications in a wide range of lighting solutions such as LED indoor lighting, LED downlights, LED ceiling lights, LED line lights, LED table lamps, LED light strips, LED flexible light strips, LED underwater lights, LED underground lights, LED projection lights, LED corrugated lights, LED wall washers, LED neon tubes, LED line lights, LED architectural lighting, LED navigation lights, LED display lights, LED advertising lights, LED mirror lights, LED film and television lights, and LED stage lights. This extensive range of applications showcases our ability to cater to diverse lighting needs across various industries.

Product Parameter (Specification) of 20W Customized LED driver of corn lamp

SPECIFICATION

MODEL

VCG-20C-30A

VCG-20C-36A

VCG-20C-42A

VCG-20C-48A

VCG-20C-54A

INPUT

Voltage Range

100-305VAC

Frequency Range

47-63Hz

Power Factor

PF≥0.98/100VAC, PF≥0.95/220VAC, PF≥0.92/277VAC @full load

Efficiency

85.00%

87.00%

88.00%

90.00%

90.50%

AC Current

0.17A/ 115VAC / 0.09A/230VAC

Inrush Current

25Amax.@Full Load,230VAC,Cold Start

Circuit Breaker

2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC

Leakagel Current

<1mA / 277VAC

OUTPUT

DC voltage

30VDC

36VDC

42VDC

48VDC

54VDC

Output rated current

24-30VA

30-36VA

36-42VA

40-48A

48-54A

Rated power

20W

Ripple & Noise

120mVp-p

150mVp-p

200mVp-p

300mVp-p

Voltage adjustment range

24-30V

30-36V

36-42V

40-48

48-54

Voltage accuracy

士 2.0%

士 1.0%

Linear adjustment rate

士 1.0%

Load regulation ratio

士 1.5%

Start, rise time

800ms,80ms/115VAC，500ms,50ms/230VAC@full load

Hold time (typ.)

30ms/115VAC，230VAC

PROTECTION

Over Current

95-110%, constant current limit, automatic recovery after abnormal load conditions are removed

Over Voltage Protection

24-30V

30-36V

36-42V

40-48

48-54

Turn off output voltage, restart recovery

Short circuit Protection

Hiccup mode, which can be automatically restored after the abnormal load condition is removed

Over Temperature

Turn off output voltage, restart recovery

ENVIRO
NMENT

Working Temp

Tcase=-40℃…+70℃

Max. Case Temp

Tcase= +90℃

Working Humidity

20-95% RH,No condensation

Storage Temp

-40...+80℃, 10...95% RH,No condensation

Vibration

10-500Hz,2G10min./1cycle,60min.eachalongX,Y,Zaxes

SAFETY &
EMC

Safety Standards

Conform UL8750(type”TL”)，CSA C22.2 No. 250.0-08，BS EN/EN/AS/NZS 61347-1，
BS EN/EN/AS/NZS 61347-2-13，independent，GB19510.1，GB19510.14，
EAC TPTC 004，KC61347-1，IP20

Withstand Voltage

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

Insulation impedance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

Electromagnetic
Compatibility

Conform BS EN/EN55015, BS EN/EN61000-3-2 Class C (@Load>60%) ;
BS EN/EN61000-3-3,GB/T 17743, GB17625.1, EAC TPTC 020

Electromagnetic compatibility
immunity

Conform BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547,Light industry standards
(Surge immunity: wire-to-ground4KV,Line-to-line:2KV), EAC TPTC 020

OTHERS

MTBF

>3000K hrs. MIL-HDBK-217F (25℃)

Dimension

φ50 mm*(H) 24mm

NOTE

1: Please refer to "LED Module Driving Method".
2: Ripple and noise measurement method: Use a 12 "twisted pair, and the terminals must be connected in parallel with 0.1 uf and 47uf capacitors, and measure at 20MHZ bandwidth.
3: Type D only adjustable (through internal potential adjustment).
4: Accuracy: including setting error, linear adjustment rate, and load adjustment rate.
5: Unless otherwise specified, all specifications are measured at 230VAC input, rated load, and 25 °C ambient temperature.
6: The power supply is regarded as a component used in combination with the terminal equipment. Because the EMC is affected by the entire device, the terminal equipment manufacturer needs to re-confirm the EMC of the entire device.

Product Details of 20W Customized LED driver of corn lamp

Equipment & instruments

Production Process

Product Applications of 20W Customized LED driver of corn lamp

Product Packaging and Shipping

20W Customized LED driver of corn lamp has a strong packaging design,it will not be worn or broken during transportation, which can ensure the product reach your hand safely.

Container Loading&Shipment

Installation Precautions:

1. Please follow the correct input voltage range for installation;

2. Make sure AC input line, DC output line, DIM signal line connect correctly.

FAQ

1.Are you a factory or trading company?
We are a factory, we provide ODM& OEM services.
2.What is your main product line is made?
We mainly produceconstant current led driver ,constant voltage led driver, and dimmable led driver

3. You have the ability to do independent research and development?
The core members of our engineering department have 12-18 years in the LED field, who can give more professional and reliable advice and solution and we have the R&D ability to make our products competitive. We also collect regularly customer feedback, products improvement and new product requirement. We also hold monthly new product launches.
4. What certificates you have?
UL, ENEC, TUV, CE, RoHS, CB, SAA, KC, PSE, BIS and CCC certifications etc.
5.What is your production capacity?
5,0000-10,000pcs per month
6.What is the warranty?
Most of our products are 5 years warranty.
7.How about the delivery time ?
Delivery time for sample:3-5days after get your samples request and samples charge.
Delivery time for mass production: 10-18days after order confirmed after receiving buyer's deposit
8.How do you handle defects?
1/1 replacement of defects within the warranty period.
9.How about the Package & Product design?
Based on factory original box,original design on product with neutral laser and label,original package for export carton.If need your mark on products or packing, please tell us, we can do it for you.